Side Chain Dynamics of Poly(norbornene)-g-Poly(propylene oxide) Bottlebrush Polymers.

The segmental dynamics of the side chains of poly(norbornene)-g-poly(propylene oxide) (PNB-g-PPO) bottlebrush polymer in comparison to PPO is studied by quasi-elastic neutron scattering. Having experimental time and length scale information simultaneously allows to extract spatial information in addition to relaxation time. Tethering one end of the PPO side chain onto a stiff PNB backbone slows down the segmental relaxation, over the length and time scales investigated. The power law dependence of the relaxation time on the momentum transfer, Q, indicates a more heterogeneous relaxation pattern for the bottlebrush polymer, whereas the linear PPO has less deviations from a homogenous relaxation. Similar conclusions can be drawn from the time dependent mean square displacement, 〈r2 (t)〉, and the non-Gaussian parameter, α2 (t). Herein, the bottlebrush polymer shows a more restricted dynamics, whereas the linear PPO reaches 〈r2 (t)〉∝t0.5 at the highest temperature. The deviations from Gaussian behavior are evident at the α2 (t). Both samples show a decaying α2 (t). The non-Gaussian parameter supports the results from the power law dependence of the relaxation times, with lower α2 (t) values for PPO compared to those for PNB-g-PPO, pointing to less deviations from Gaussian behavior.

Lipid Membrane Binding and Cell Protection Efficacy of Poly(1,2-butylene oxide)-b-poly(ethylene oxide) Copolymers.

Poloxamers consisting of poly(ethylene oxide) (PEO) and poly(propylene oxide) segments can protect cell membranes against various forms of stress. We investigated the role of the hydrophobic block chemistry on polymer/membrane binding and cell membrane protection by comparing a series of poly(butylene oxide)-b-PEO (PBO-b-PEO) copolymers to poloxamer analogues, using a combination of pulsed-field-gradient (PFG) NMR experiments and a lactate dehydrogenase (LDH) cell assay. We found that the more hydrophobic PBO-b-PEO copolymers bound more significantly to model liposomes composed of 1-palmitol-2-oleoyl-glycero-3-phosphocholine (POPC) compared to poly(propylene oxide) (PPO)/PEO copolymers. However, both classes of polymers performed similarly when compared by an LDH assay. These results present an important comparison between polymers with similar structures but with different binding affinities. They also provide mechanistic insight as enhanced polymer/lipid membrane binding did not directly translate to increased cell protection in the LDH assay, and therefore, additional factors need to be considered when trying to achieve greater membrane protection efficacy.

Optimization of Bioactive Phenolics Extraction and Cosmeceutical Activity of Eco-Friendly Polypropylene-Glycol-Lactic-Acid-Based Extracts of Olive Leaf.

Olive leaf is a rich source of phenolic compounds with numerous activities related to skin health and appearance. In this study, a green extraction method was developed using eco-friendly solvents: polypropylene glycol (PPG), lactic acid (LA), and water. The optimal extraction conditions were established, including solvent, extraction time, technique (magnetic stirrer vs. ultrasound-assisted extraction), and herbal material/solvent ratio. The composition of the solvent mixture was optimized using a mixture design. The content of phenolic compounds, including oleuropein and verbascoside, was determined using high-performance liquid chromatography (HPLC) and spectrophotometric methods. Using different extraction conditions, three extracts were prepared and their phytochemical compositions and antioxidant and skin-related bioactivities were investigated. The extracts were excellent inhibitors of elastase, collagenase, tyrosinase, and lipoxygenase. The best activity was shown by the extract richest in phenolics and prepared using magnetic-stirrer-assisted extraction for 20 min, with 0.8 g of herbal material extracted in 10 mL of PPG/LA/water mixture (28.6/63.6/7.8, w/w/w), closely followed by the extract prepared using the same extraction conditions but with 0.42 g of herbal material. The investigated PPG/LA/water mixtures contributed to the overall enzyme-inhibitory activity of the extracts. The prepared extracts were appropriate for direct use in cosmetic products, thus saving the time and energy consumption necessary for the evaporation of conventional solvents.

Formulation, Solubilization, and In Vitro Characterization of Quercetin-Incorporated Mixed Micelles of PEO-PPO-PEO Block Copolymers.

Quercetin (QCN) is a plant polyphenol with a variety of medicinal effects. Poor water solubility, on the other hand, restricts its therapeutic effectiveness. The purpose of this study was to develop mixed micellar systems using two biocompatible amphiphilic PEO-PPO-PEO triblock copolymers, Pluronic P123 (EO20-PO70-EO20) and Pluronic F88 (EO104-PO39-EO104), in order to enhance the aqueous solubility and oral bioavailability of QCN drug. The critical micelle concentrations (CMCs) of mixed P123/F88 micellar solutions were investigated using UV-visible spectroscopy with pyrene as a probe. Mixed P123/F88 micelles have low CMCs, indicating that they have a stable micelle structure even when diluted. The solubility of QCN in aqueous mixed P123/F88 micellar solutions at different temperatures was investigated to better understand drug entrapment. The QCN solubility increased with increasing temperature in the mixed P123/F88 micellar system. The QCN-incorporated mixed P123/F88 micelles were prepared using the thin-film hydration method and were well characterized in terms of size and morphology, compatibility, in vitro release and antioxidant profile. In addition, the cell proliferation activity of the mixed micelles was evaluated in the MCF-7 cell line. The QCN-incorporated mixed P123/F88 micelles had a small particle size (< 25 nm) and a negative zeta potential with a spherical shape. The in vitro release behaviour of QCN from a mixed P123/F88 micellar system was slower and more sustained at physiological conditions. The oxidation resistance of QCN-incorporating mixed P123/F88 micelles was shown to be considerably higher than that of pure QCN. An in vitro cell proliferation study revealed that QCN-incorporated mixed micells were effective in inhibiting tumour cell growth. In conclusion, the QCN-incorporated mixed P123/F88 micelle may be a promising approach to increase QCN oral bioavailability, antioxidant activity, and cell viability.

Propanediol (and) Caprylic Acid (and) Xylitol as a New Single Topical Active Ingredient against Acne: In Vitro and In Vivo Efficacy Assays.

In addition to dermatological complications, acne can affect the quality of life of individuals in numerous ways, such as employment, social habits and body dissatisfaction. According to our expertise, caprylic acid and propanediol would not have a direct action on Cutibacterium acnes. Despite this, we investigated the existence of a synergistic effect among xylitol, caprylic acid and propanediol as a mixture of compounds representing a single topical active ingredient that could benefit the treatment against acne. In vitro and in vivo assays were performed to challenge and to prove the efficacy of propanediol, xylitol and caprylic acid (PXCA) against acne. PXCA had its MIC challenged against C. acnes (formerly Propionibacterium acnes) and Staphylococcus aureus, resulting in concentrations of 0.125% and 0.25%, respectively, and it also developed antimicrobial activity against C. acnes (time-kill test). PXCA was able to reduce the 5-alpha reductase expression in 24% (p < 0.01) in comparison with the testosterone group. By the end of 28 days of treatment, the compound reduced the skin oiliness, porphyrin amount and the quantity of inflammatory lesions in participants. According to the dermatologist evaluation, PXCA improved the skin's general appearance, acne presence and size.

Functional Polyglycidol-Based Block Copolymers for DNA Complexation.

Gene therapy is an attractive therapeutic method for the treatment of genetic disorders for which the efficient delivery of nucleic acids into a target cell is critical. The present study is aimed at evaluating the potential of copolymers based on linear polyglycidol to act as carriers of nucleic acids. Functional copolymers with linear polyglycidol as a non-ionic hydrophilic block and a second block bearing amine hydrochloride pendant groups were prepared using previously synthesized poly(allyl glycidyl ether)-b-polyglycidol block copolymers as precursors. The amine functionalities were introduced via highly efficient radical addition of 2-aminoethanethiol hydrochloride to the alkene side groups. The modified copolymers formed loose aggregates with strongly positive surface charge in aqueous media, stabilized by the presence of dodecyl residues at the end of the copolymer structures and the hydrogen-bonding interactions in polyglycidol segments. The copolymer aggregates were able to condense DNA into stable and compact nanosized polyplex particles through electrostatic interactions. The copolymers and the corresponding polyplexes showed low to moderate cytotoxicity on a panel of human cancer cell lines. The cell internalization evaluation demonstrated the capability of the polyplexes to successfully deliver DNA into the cancer cells.

N-Palmitoyl Serinol Stimulates Ceramide Production through a CB1-Dependent Mechanism in In Vitro Model of Skin Inflammation.

Ceramides, a class of sphingolipids containing a backbone of sphingoid base, are the most important and effective structural component for the formation of the epidermal permeability barrier. While ceramides comprise approximately 50% of the epidermal lipid content by mass, the content is substantially decreased in certain inflammatory skin diseases, such as atopic dermatitis (AD), causing improper barrier function. It is widely accepted that the endocannabinoid system (ECS) can modulate a number of biological responses in the central nerve system, prior studies revealed that activation of endocannabinoid receptor CB1, a key component of ECS, triggers the generation of ceramides that mediate neuronal cell fate. However, as the impact of ECS on the production of epidermal ceramide has not been studied, we here investigated whether the ECS stimulates the generation of epidermal ceramides in an IL-4-treated in vitro model of skin inflammation using N-palmitoyl serinol (PS), an analog of the endocannabinoid N-palmitoyl ethanolamine. Accordingly, an IL-4-mediated decrease in cellular ceramide levels was significantly stimulated in human epidermal keratinocytes (KC) following PS treatment through both de novo ceramide synthesis- and sphingomyelin hydrolysis-pathways. Importantly, PS selectively increases ceramides with long-chain fatty acids (FAs) (C22-C24), which mainly account for the formation of the epidermal barrier, through activation of ceramide synthase (CerS) 2 and Cer3 in IL-4-mediated inflamed KC. Furthermore, blockade of cannabinoid receptor CB1 activation by AM-251 failed to stimulate the production of total ceramide as well as long-chain ceramides in response to PS. These studies demonstrate that an analog of endocannabinoid, PS, stimulates the generation of specific ceramide species as well as the total amount of ceramides via the endocannabinoid receptor CB1-dependent mechanism, thereby resulting in the enhancement of epidermal permeability barrier function.

Polymeric Drug Delivery System Based on Pluronics for Cancer Treatment.

Pluronic polymers (pluronics) are a unique class of synthetic triblock copolymers containing hydrophobic polypropylene oxide (PPO) and hydrophilic polyethylene oxide (PEO) arranged in the PEO-PPO-PEO manner. Due to their excellent biocompatibility and amphiphilic properties, pluronics are an ideal and promising biological material, which is widely used in drug delivery, disease diagnosis, and treatment, among other applications. Through self-assembly or in combination with other materials, pluronics can form nano carriers with different morphologies, representing a kind of multifunctional pharmaceutical excipients. In recent years, the utilization of pluronic-based multi-functional drug carriers in tumor treatment has become widespread, and various responsive drug carriers are designed according to the characteristics of the tumor microenvironment, resulting in major progress in tumor therapy. This review introduces the specific role of pluronic-based polymer drug delivery systems in tumor therapy, focusing on their physical and chemical properties as well as the design aspects of pluronic polymers. Finally, using newer literature reports, this review provides insights into the future potential and challenges posed by different pluronic-based polymer drug delivery systems in tumor therapy.

Topical N-palmitoyl serinol, a commensal bacterial metabolite, prevents the development of epidermal permeability barrier dysfunction in a murine model of atopic dermatitis-like skin.

Recent studies have demonstrated that commensal bacterial metabolites benefit human health. Because of the crucial role of the epidermal permeability barrier in cutaneous and extracutaneous function, we assessed whether the topical applications of N-palmitoyl serinol (NPS) would improve the epidermal permeability barrier in murine skin. Our results show that the topical application of 0.5% NPS in ethanol twice daily for 1 week lowered basal transepidermal water loss rates and accelerated barrier recovery in normal mice. Moreover, topical NPS prevented the emergence of epidermal permeability barrier dysfunction in a murine model of allergic contact dermatitis. These results suggest that topical NPS could be used to prevent or treat skin disorders characterized by inflammation and an abnormal epidermal permeability barrier.

Des études récentes ont démontré que les métabolites des bactéries commensales sont bénéfiques pour la santé humaine. En raison du rôle crucial de la barrière de perméabilité épidermique dans la fonction cutanée et extra-cutanée, nous avons évalué si les applications topiques de N-palmitoyl sérinol (NPS) amélioreraient la barrière de perméabilité épidermique dans la peau murine. Nos résultats montrent que l'application topique de 0,5 % de NPS dans de l'éthanol deux fois par jour pendant 1 semaine a réduit les taux de base de perte d'eau trans-épidermique et accéléré la récupération de la barrière chez les souris normales. De plus, le NPS topique a empêché l'émergence d'un dysfonctionnement de la barrière de perméabilité épidermique dans un modèle murin de dermatite de contact allergique. Ces résultats suggèrent que le NPS topique pourrait être utilisé pour prévenir ou traiter les troubles cutanés caractérisés par une inflammation et une barrière de perméabilité épidermique anormale.(Traduit par Docteur Serge Messier).

The development and qualification of liquid adsorption chromatography for poloxamer 188 characterization.

Poloxamer 188 (P188) is formulated in proteinaceous therapeutics as an alternative surfactant to polysorbate because of its good chemical stability and surfactant properties, which enable interfacial protection, preventing visible and sub-visible particle formation. However, due to the nature of polymer heterogeneity and limited analytical approaches to resolve the superimposed components of P188, the impact of its quality variance on protein stability is still not well understood. In this study, we developed an analytical method to evaluate the components of P188 as a function of the length of polypropylene oxide (PPO), by maintaining polyethylene oxide (PEO) at the critical point of adsorption (CPA) to eliminate its chromatographic interference. The effectiveness of the separation was confirmed by nuclear magnetic resonance (NMR) spectroscopy and mass spectroscopy (MS) of the individual fractions corresponding to each peak. Additionally, a design of experiments (DoE) and method qualification were carried out to identify and optimize the key operation parameters, including column temperature and evaporative light scattering detector (ELSD) settings that need to be strictly controlled for reliable analytical results. In conclusion, this method is sensitive and reliable to compare the quality variance of commercial P188 and is suitable for routine quality control purposes. The application of this method could help in further understanding the Critical Material Attributes (CMA) that may affect the quality attributes of proteins in formulations.

Monochloropropanediol in edible vegetable oils from Hangzhou market in China: occurrence and exposure risk assessment.

In this study, 241 vegetable-oil food samples were collected from the Hangzhou market in China and analysed for fatty acid esters of 3- and 2-monochloropropanediol (3-MCPD and 2-MCPD) using non-derivative gas chromatography tandem mass spectrometry (GC-MS/MS). Food consumption data were taken from a food consumption survey of urban and rural residents in Hangzhou city performed in 2010-2011. Levels of 3-MCPD esters in edible oil ranged from not detected to 7.98 mg/kg, and the highest mean levels were found in tea seed oil, with concentrations of 2.94 mg/kg. Esters of 2-MCPD levels ranged from not detected to 4.03 mg/kg, and the highest mean levels were also found in tea seed oil, containing 1.49 mg/kg. The range of mean dietary intake of 3-MCPD esters in different groups of edible oil was from 0.096 to 1.54 µg/kg body weight (bw) per day, which is lower than the tolerable daily intake (TDI) established by the European Food Safety Authority (EFSA) (2 µg/kg bw/day). For people aged above 6 years old, the dietary intake of 3-MCPD from edible oil was 0.42 µg/kg bw per day (mean) and 1.22 µg/kg bw per day (P97.5). The range of mean dietary intake of 2-MCPD esters in different groups of edible oil was from 0.025 to 0.79 µg/kg bw/day, and 2-MCPD esters intake was 0.20 µg/kg bw per day (mean) and 0.60 µg/kg bw per day (P97.5). In addition, the dietary intake exposure to 3-MCPD and 2-MCPD esters for urban residents was lower than that for rural residents. The findings indicate that the potential health risks caused by dietary 3-MCPD esters from edible oils were of low concern for most of the Hangzhou residents. However, the exposure risk for consumers with excessive consumption of certain kind of edible oil calls for attention.

Automated sample preparation and analysis by gas chromatography tandem mass spectrometry (GC-MS/MS) for the determination of 3- and 2-monochloropropanediol (MCPD) esters and glycidol esters in edible oils.

The potentially carcinogenic process contaminant 3- and 2-monochloropropanediol esters (2-MCPD and 3-MCPD esters) and glycidyl esters (GEs) are under study in refined oils and foodstuffs. Legislation set recommended total daily intake (TDI) for 3-MCPD of 0.8 µg/kg and as low as reasonably achievable (ALARA) for glycidol. Usually, the so far adopted method for the determination of these contaminants relay on numerous and time-consuming steps for sample preparation (AOCS methods) and on GC-MS detection. The obtained sensitivities and the number of processable samples are thus limited. In this optic, new reliable methods that allow for the fast and sensitive determination of these contaminants in edible oils may be considered an improvement of the overall strategy of tackling the problem. In this paper a new automated method for sample preparation and detection by GC-MS/MS is presented and validated. Data on sensitivity (LOD at 1.5, 2.2 and 3 ng/g for 3-MCPD, 2-MCPD, 3-MBPD (deriving from glycidol), respectively), linearity across low and high calibration ranges and precision showed to be fit-for-purposes. Finally, the methodology was applied to ten extra virgin oil samples and one sample of sunflower seeds oil.

Poly(ß-cyclodextrin)-Activated Carbon Gel Composites for Removal of Pesticides from Water.

Pesticides are widely used in agriculture to increase and protect crop production. A substantial percentage of the active substances applied is retained in the soil or flows into water courses, constituting a very relevant environmental problem. There are several methods for the removal of pesticides from soils and water; however, their efficiency is still a challenge. An alternative to current methods relies on the use of effective adsorbents in removing pesticides which are, simultaneously, capable of releasing pesticides into the soil when needed. This reduces costs related to their application and waste treatments and, thus, overall environmental costs. In this paper, we describe the synthesis and preparation of activated carbon-containing poly(ß-cyclodextrin) composites. The composites were characterized by different techniques and their ability to absorb pesticides was assessed by using two active substances: cymoxanil and imidacloprid. Composites with 5 and 10 wt% of activated carbon showed very good stability, high removal efficiencies (>75%) and pesticide sorption capacity up to ca. 50 mg g-1. The effect of additives (NaCl and urea) was also evaluated. The composites were able to release around 30% of the initial sorbed amount of pesticide without losing the capacity to keep the maximum removal efficiency in sorption/desorption cycles.

Optimization of Two Eco-Friendly Extractions of Black Medick (Medicago lupulina L.) Phenols and Their Antioxidant, Cosmeceutical, α-Glucosidase and α-Amylase Inhibitory Properties.

Medicago lupulina is an ancient edible plant from the Fabaceae family. In this work, two eco-friendly methods for extraction of bioactive phenolics from M. lupulina were developed using mixtures of water with two non-toxic, skin- and environmentally-friendly polyol solvents: glycerol and polypropylene glycol. Ultrasound-assisted extractions were optimized using a Box-Behnken design. The independent variables were the concentration of organic solvent in water (X1), extraction temperature (X2) and time (X3), while the response was phenolic content. The optimum conditions for extraction of polyphenols were (X1, X2, X3): (45%, 70 °C, 60 min) and (10%, 80 °C, 60 min) for glycerol and polypropylene glycol extraction, respectively. The extracts prepared at optimum conditions were rich in phenolic compounds, mainly derivatives of apigenin, kaempferol, luteolin, quercetin, caffeic and ferulic acid, as well as coumestrol. Their cosmeceutical and antidiabetic activity was tested. Both extracts demonstrated notable antioxidant, anti-lipoxygenase and anti-α-amylase activity. In addition to those activities, the glycerol extract efficiently inhibited protein coagulation, elastase and α-glucosidase activity. Glycerol present in the extract displayed enzyme-inhibiting activity in several assays and supported the action of the bioactive constituents. Thus, the optimized glycerol extract is a desirable candidate for direct incorporation in antidiabetic food supplements and cosmeceutical products.

Robustness analysis and identification for an enzyme-catalytic complex metabolic network in batch culture.

Bioconversion of glycerol to 1,3-propanediol is a promising way to mitigate the shortage of energy. To maximize the production of 1,3-propanediol, it needs to control precisely microbial fermentation process. However, it might consume lots of human and material resources when conducting experimental tests many times. In this study, a nonlinear enzyme-catalytic dynamical system is developed to describe the bioconversion process of glycerol to 1,3-propanediol, especially continuous piecewise linear functions are used as identification parameters. The existence, uniqueness and continuity of solutions are also discussed. Then, considering the fact that the concentration of intracellular substances is difficult to measure in experiments, a new quantitative definition of biological robustness is introduced as a performance index to determine the identification parameters related to intracellular substances. Meanwhile, a two-phase optimization algorithm is constructed to solve the identification model. By comparison with the experimental data, it can be found that the present nonlinear dynamical system can describe the fermentation process very well. Finally, the present nonlinear dynamical system and the corresponding optimal identification parameters might be useful in future studies on the batch culture of glycerol to 1,3-propanediol.

Enantioselective Desymmetrization of 2-Aryl-1,3-propanediols by Direct O-Alkylation with a Rationally Designed Chiral Hemiboronic Acid Catalyst That Mitigates Substrate Conformational Poisoning.

Enantioselective desymmetrization by direct monofunctionalization of prochiral diols is a powerful strategy to prepare valuable synthetic intermediates in high optical purity. Boron acids can activate diols toward nucleophilic additions; however, the design of stable chiral catalysts remains a challenge and highlights the need to identify new chemotypes for this purpose. Herein, the discovery and optimization of a bench-stable chiral 9-hydroxy-9,10-boroxarophenanthrene catalyst is described and applied in the highly enantioselective desymmetrization of 2-aryl-1,3-diols using benzylic electrophiles under operationally simple, ambient conditions. Nucleophilic activation and discrimination of the enantiotopic hydroxy groups on the diol substrate occurs via a defined chairlike six-membered anionic complex with the hemiboronic heterocycle. The optimal binaphthyl-based catalyst 1g features a large aryloxytrityl group to effectively shield one of the two prochiral hydroxy groups on the diol complex, whereas a strategically placed "methyl blocker" on the boroxarophenanthrene unit mitigates the deleterious effect of a competing conformation of the complexed diol that compromised the overall efficiency of the desymmetrization process. This methodology affords monoalkylated products in enantiomeric ratios equal or over 95:5 for a wide range of 1,3-propanediols with various 2-aryl/heteroaryl groups.

Efficient Production of 1,3-Propanediol from Diverse Carbohydrates via a Non-natural Pathway Using 3-Hydroxypropionic Acid as an Intermediate.

1,3-Propanediol (1,3-PDO) is a promising platform chemical used to manufacture various polyesters, polyethers, and polyurethanes. Microbial production of 1,3-PDO using non-natural producers often requires adding expensive cofactors such as vitamin B12, which increases the whole production cost. In this study, we proposed and engineered a non-natural 1,3-PDO synthetic pathway derived from acetyl-CoA, enabling efficient accumulation of 1,3-PDO in Escherichia coli without adding expensive cofactors. This functional pathway was established by introducing the malonyl-CoA-dependent 3-hydroxypropionic acid (3-HP) module and screening the key enzymes to convert 3-HP to 1,3-PDO. The best engineered strain can produce 2.93 g/L 1,3-PDO with a yield of 0.35 mol/mol glucose in shake flask cultivation (and 7.98 g/L in fed-batch fermentation), which is significantly higher than previous reports based on homoserine- or malate-derived non-natural pathways. We also demonstrated for the first time the feasibility of producing 1,3-PDO from diverse carbohydrates including xylose, glycerol, and acetate based on the same pathway. Thus, this study provides an alternative route for 1,3-PDO production.

OH radical reactions with the hydrophilic component of sphingolipids.

In this work, using the example of model compounds, we studied the reactions resulting from the interaction of OH radicals with the hydrophilic part of sphingolipids. We compared the stopped-flow EPR spectroscopy and pulse radiolysis with optical detection methods to characterize radical intermediates formed in the reaction of OH radicals with glycerol, serinol and N-boc-serinol. Quantum chemical calculations were also performed to help interpret the observed experimental data. It was shown that H-abstraction from the terminal carbon atom is the main process that is realized for all the studied compounds. The presence of the unsubstituted amino group (-NH2) is seen to completely change the reaction properties of serinol in comparison with those observed in glycerol and N-boc serinol.

Oral self-nanoemulsifying formulation of GLP-1 agonist peptide exendin-4: development, characterization and permeability assesment on Caco-2 cell monolayer.

The objective of this study was to prepare a stable self-nanoemulsifying formulation of exendin-4, which is an antidiabetic peptide. As exendin-4 is commercially available only in subcutaneous form, several attempts have been made to discover an effective oral formulation. Self-nanoemulsifying drug delivery systems are known to be suitable carriers for the oral administration of peptide drugs. Various ratios of oil, surfactant, and co-surfactant mixtures were used to determine the area in the pseudoternary phase diagram for clear nanoemulsion. The Design of Experiment approach was used for the optimization of the formulation. Blank self-nanoemulsifying formulations containing ethyl oleate as oil phase, Cremophor EL®, and Labrasol® as surfactant, absolute ethanol, and propylene glycol as co-solvent in various proportions were approximately 18-50 nm, 0.08-0.204 and - 3 to - 23 mV in droplet size, polydispersity index, and zeta potential, respectively. When all formulations were compared by statistical analysis, five of them with smaller droplet sizes were selected for further studies. The physical stability test was performed for 1 month at 5 °C ± 3 °C and 25 °C ± 2 °C/60% RH ± 5% RH storage conditions. As a result of the characterization and physical stability test results, ethyl oleate: Cremophor EL®:absolute ethanol (30:52.5:17.5) formulation and four formulations containing ethyl oleate: Cremophor EL®:Labrasol®:propylene glycol:absolute ethanol at varying concentrations were considered for peptide encapsulation efficiency. Formulation having the highest encapsulation efficiency of exendin-4 containing ethyl oleate: Cremophor EL®:Labrasol®:propylene glycole:absolute ethanol (15:42.5:21.25:15.94:5.31) was selected for in vitro Caco-2 intestinal permeability study. The permeabiliy coefficient was increased by 1.5-folds by exendin-4-loaded self-nanoemulsifying formulation as compared to the exendin-4 solution. It can be concluded that intestinal permeability has been improved by self-nanoemulsifying formulation.

Drug Delivery: Hydrophobic Drug Encapsulation into Amphiphilic Block Copolymer Micelles.

Drug encapsulation into amphiphilic block copolymer micelles aims to increase drug solubility and minimize drug degradation upon administration, avoid undesirable side effects and ameliorate drug bioavailability. Drug encapsulation methodologies including thin-film hydration method and organic cosolvent method are described in this chapter. Often, it is desirable to determine the most efficient solubilization protocol leading to functional drug delivery nanovehicles in each case. The encapsulation of curcumin into PEO-b-PPO-b-PEO (Pluronic F-127) polymeric micelles through thin-film hydration method presents the most promising results. Indomethacin can be loaded successfully into the hydrophobic cores of PEO-b-PCL amphiphilic block copolymer micelles following both encapsulation protocols.